Introduction
Chapter 1
WAAS G-III Reference Receiver User Manual Rev 1
21
Section 2.1, Typical Installation
on
Page 22
provides information about connecting to the ports, while
Table
54, Port Specifications
on
Page 136
in
Appendix A
gives specifications on the connectors and signals provided
at these ports.
Table 4: Radio Frequency Ports
Label
Description
J06
10 MHz IN
10 MHz frequency reference input port
Connects to an external 10 MHz frequency reference.
J07
10 MHz OUT
10 MHz frequency reference output port
Outputs the 10 MHz frequency reference signal.
J08
1 PPS IN
1 Pulse Per Second (PPS) input port
This port is not available for use.
J09
1 PPS OUT
1 Pulse Per Second (PPS) output port
An output port for a 1 Pulse Per Second (PPS) signal used for time
synchronization.
J10
RF1 OUT
Radio Frequency (RF) Output
An RF test port that outputs the RF signal received from the GNSS antenna.
J11
RF1 IN
Radio Frequency (RF) Input
Connects to the GNSS antenna.
This port can also supply DC power to the antenna. See
Section 4.4.2,
ANTENNAPOWER
on
Page 46
.
10
MHz
IN
J06
J07
J08
J09
J10
J11
10
MHz
OUT
1 PPS
IN
1 PPS
OUT
RF1
OUT
RF1
IN
