background image

~ 11 ~ 

NOVATEK-ELECTRO                                                                                                                 MCK-108

 

2)  Visually  check  the  integrity  of  the  housing,  in  case  of  detection  of  cracks  and  damages  to  remove  the 

product from service and send for repair; 

3) If necessary, wipe with cloth the front panel and the product housing. 

 

Do not use abrasives and solvents for cleaning. 

 

4 TRANSPORTATION AND STORAGE 

 

MCK-108  in  the  manufacturer's  package  must  be  stored  in  an  indoor  area  at  the  temperature  from  minus  45  to  

+60 

C and relative humidity not exceeding 80 %, provided there are no vapours, causing any damaging impact on the 

package and the materials of the device. 

 

5 OPERATION LIFE AND 

MANUFACTURER’S WARRANTY 

 

5.1.

 The lifetime of the product is 10 years. Upon expiration of the service life, contact the manufacturer. 

5.2.

 Shelf life is 3 years. 

5.3.

 Warranty period of the product operation is 5 years from the date of sale. 

During the warranty period of operation (in the case of failure of the product) the manufacturer is responsible 

for free repair of the product. 

 

ATTENTION!  IF  THE  PRODUCT  HAS  BEEN  OPERATED  IN  VIOLATION  OF  THE  REQUIREMENTS  OF 

THIS MANUAL, THE MANUFACTURER HAS THE RIGHT TO REFUSE IN WARRANTY SERVICE. 

 

5.4.

 Warranty service is performed at the place of purchase or by the manufacturer of the product. 

5.5.

 Post-warranty service of the product is performed by the manufacturer at current rates. 

5.6.

  Before  sending  for  repair,  the  product  should  be  packed  in  the  original  or  other  packing  excluding 

mechanical damage. 

 

Earnest request:

 indicate the reason for return in the notice of faults field at the return of the device or in case of 

submitting for warranty service or post-warranty service. 

 

6 ACCEPTANCE CERTIFICATE 

 

The  pumping  plant  controller  MCK-108  No._________  is  produced  and  accepted  according  to  the 

requirements of the effective technical documentation and is acknowledged to be suitable for operation. 

 

             Chief of quality department                                                             

Date of Issue 

 

     

STAMP

 

 

          ______________  

 

 

 

 

        _____________ 

  

 
 
 
 
 
 
 
 

7 INFORMATION ON CLAIMS 

__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
__________________________________________________________________________________ 
 

"Novatek-Electro" Ltd. 

       59, Admiral Lazarev str.,

      

Odessa, 65007, Ukraine                                                    
tel

:

+38 048 738-00-28;

 

+38 0482 37-48-27;

 

   

fax:

 

+38 0482 34 36 73 

www.novatek-electro.com 

 

  Date of Sale

 ________________

                                                                                                                                            

VN 180625

 

Summary of Contents for MCK-108












Reviews: