NovaStar MCTRL4K, User Manual

Page: 7 / 39

MCTRL4K LED Display Controller User Manual
www.novastar.tech 4

OPT1 transmits the data of Ethernet ports 1 to 8.

OPT2 transmits the data of Ethernet ports 9 to 16.

OPT3 is a duplicate channel of OPT1.

OPT4 is a duplicate channel of OPT2.
Control ETHERNET Connect to the control computer.
USB IN-OUT

IN: 1x USB 2.0 (Type-B)
Input port for cascading MCTRL4K units, or connecting to a PC for
debugging

OUT: 1x USB 2.0 (Type-A)
Output port for cascading MCTRL4K units
Up to 10 units can be cascaded.
GENLOCK IN-
LOOP Sync signal connector
Support for Bi-level, Tri-level, and Blackburst

IN: Genlock input connector

LOOP: Genlock loop output connector
Power AC 100 V~240 V-50/60 Hz
Note

When the input source is HDMI or DP, the 144 Hz forced resolution input from the front end device can
be parsed. In this situation, the loading capacity is reduced by half.

This product can only be placed horizontally. Do not mount vertically or upside-down.
西安诺瓦星云科技股份有限公司