NovaStar MCTRL4K, User Manual

Page: 18 / 39

MCTRL4K LED Display Controller User Manual
www.novastar.tech 15
Figure 6-7
Advanced configuration
Step 1 Choose Screen Settings > Advanced Config and press the knob.
Step 2 In the caution dialog screen, select Yes to enter the advanced configuration screen.
Step 3 Enable Advanced Config , select an Ethernet port, set the parameters for it, and apply the settings.
Step 4 Select the next Ethernet port to continue setting until all the Ethernet ports are set.
6.3.2 Image Offset
After configuring the screen, adjust the horizontal and vertical offsets ( Start X and Start Y ) of the overall
display image to ensure it is displayed in the desired position.
Figure 6-8
Image offset
Display Control
Control the display status on the LED screen.
Figure 6-9
Display control
 Normal: Display the content of the current input source normally.
 Black Out: Make the LED screen go black and do not display the input source. The input source is still
being played in the background.
西安诺瓦星云科技股份有限公司