NovaStar MCTRL4K, User Manual

Page: 17 / 39

MCTRL4K LED Display Controller User Manual
www.novastar.tech 14
d). During data flow settings, ensure that the cabinets loaded by each Ethernet port are connected one by
one in the same direction.
e). During data flow settings, ensure that Ethernet port 1 is at the beginning position of the whole physical
connection.
Brightness Adjustment
This function allows you to adjust the LED screen brightness in an eye-friendly way according to the current
ambient brightness. Besides, appropriate screen brightness can extend the service life of the LED screen.
Figure 6-6
Brightness adjustment
Step 1 On the home screen, press the knob to enter the main menu screen.
Step 2 Select Brightness and press the knob to confirm the selection.
Step 3 Rotate the knob to adjust the brightness value. You can see the adjustment result on the LED screen in real
time. Press the knob to apply the brightness you set when you are satisfied with it.
Screen Settings
Configure the LED screen to ensure the screen can display the entire input source normally.
Screen configuration methods include quick and advanced configurations. They have constraints:
 The two methods cannot be enabled at the same time.
 After the screen is configured in NovaLCT, do not use any of the two methods on the MCTRL4K to
configure the screen again.
6.3.1 Advanced Configuration
Set parameters for each Ethernet port, including number of cabinet rows and columns ( Cabinet Row QTY
and Cabinet Col QTY ), horizontal offset ( Start X ), vertical offset ( Start Y ), and data flow.
西安诺瓦星云科技股份有限公司