80
IMS-MN-LMDE42C_A
ICP0531 Encoder Back-up Battery Pack
Liberty MDrive Ethernet TCP/IP
Installing/Replacing the Batteries
NOTE:
Use only Energizer L91 1.5V AA Lithium batteries.
CAUTION
FLAMMABILITY HAZARD
Do not load or transport lithium ion batteries if the packaging is damaged. Handle damaged batteries
with care.
Failure to follow these instructions can result in injury or equipment damage.
Attention
: if Lithium batteries are installed, provide proper package warning labels to all
shipping containers as required by law.
1. Open the battery pack by removing the four (4) screws on the back side of the case.
2. Install the batteries taking care to match the imprints on the battery holder.
+
+
+
–
–
–
NOTICE
EQUIPMENT DAMAGE
Observe proper polarity during battery installation.
Failure to follow these instructions can result in equipment damage.
