4
I. GENERAL
HINTS
Playing with the NOVAG EMERALD CLASSIC
plus
is easy compared to other chess computers, however we
recommend reading the general instructions before starting to play. The detailed instructions are laid out in such a way
that each section is self-contained, so you do not have to read everything at once.
BATTERIES
The EMERALD CLASSIC
plus
runs on six 1,5V UM-2 type, or size 'C'
alkaline
or heavy duty batteries (
not included
).
Note:
Do not use regular batteries, as they will result in irregular performance.
To insert the batteries open the BATTERY DOOR on the backside of the unit and place the batteries as indicated by the
+/- signs. A set of new alkaline batteries runs approx. 250 hours. (continuous operation). If you don't use your computer
over a long period of time, please remove the batteries.
ADAPTOR
The EMERALD CLASSIC
plus
uses the Novag adaptor Art. No. 8210 which is separately available. Before using the
adaptor check that the voltage of your electric output is within the range specified on the adaptor label. The adaptor socket
is located at the back panel of your computer. Please only use the adaptor specified for your computer. The use of any
other adaptor automatically invalidates the warranty.
Note:
Make sure you first connect the adaptor with the computer before you plug it into the mains.
MEMORY
The EMERALD CLASSIC
plus
has a long-term memory and will retain the last board position. However, make sure that
there are batteries in the chess computer or an adaptor connected otherwise you will lose the memory contents.
II. SHORT
INSTRUCTIONS
1.
Before commencing to play set up the chess pieces in the opening position. White pieces on rank 1 and 2, Black
pieces on rank 7 and 8.
2.
The power switch is a 2-position switch and is at the backside of the cabinet. It is marked ON/OFF. Push this switch
towards ON (towards the power socket). This switch operates both adaptor and batteries. If you use an adaptor, the
batteries will automatically be disabled.
3.
Press NEW GAME. You will hear 3 beeps and the LCD will show [
] with the white bar. You can now make
your opening move for White.
4.
If you wish to increase the level of skill press the SET LEVEL key and select one of the two LEVEL GROUPS
before you press the square corresponding to the desired level (
a1, a2, a3,
up to
h8
). On the LCD display you will
see a number indicating the present level set. (See IV. 2. for level setting and their time controls).
