Nottrot N-LINE, Owner'S Manual

Page: 11 / 30

P 11 / 30
N-LINE OWNERS MANUAL
OSD item Function Hotkey function
Menu Enter, Exit
Function select, Enter Source select
Sleep mode (ON/OFF)
Left, Decrease Auto adjust. This function sets the image
parameters (Phase and clock)
Right, Increase Backlight adjustment. Use < and > to adjust
O
Status LED:
Red: No signal
Green: Correct input signal on selected
source
The control functions defined on OSD operation are as below.
OSD MENU Description OSD MENU Description
Picture Mode Picture preset mode. (Standard, Dynamic, Soft, Personal)
Contrast Adjust the contrast of the screen.
Brightness Adjust the brightness of the screen.
Backlight Adjust the backlight of the screen.
Sharpness Adjust the sharpness of the screen’s image.
Tint Adjust the tint of the screen’s image.
Color Adjust the color of the screen’s image.
Color Mode Adjust color temperature of the screen’s image.
H-Pos Adjust the horizontal position of the screen’s image
V-Pos Adjust the vertical position of the screen's image
Clock Adjust the horizontal size of the screen's image
Phase Adjust the focus of the screen's image
Auto Automatically adjust the Horizontal position, Vertical position,
Window's background or characters should be displayed on your full screen prior
to precede this function.
3D NR Select NR mode. (Standard, Strong, Auto, Off, Weak)
Menu Language Select the OSD language. (English,Française,Deutsch,Italiano,Español,Nederlands)
Transparency Adjust the OSD transparency level. (0 ~ 100%)
OSD Time Out Define OSD time out. (5Sec ~ 60Sec)
Restore Default Initializing that memory by factory presetting except OSD language.
Sleep Timer Adjust the sleep timer. (0 ~ 240Min)
Zoom Mode Select the zoom mode. (Normal, Wide, Zoom)
Image Flip Image is reversed by vertical. (On, Off)
Image Mirror Image is reversed by horizontal. (On, Off)
Auto Source Detect the valid input source automatically. (On, Off)
XGA Mode Select the resolution of RGB input (1024x768, 1280x768,,1360x768, 1366x768)
HDMI Mode Select the HDMI image setting. (PC, Video, No Overscan)
Source Select video input source using OSD or direct key in Remocon.