P
15
/
30
N-LINE OWNERS MANUAL
9.7
Projected capacitive touch screen
When using projected capacitive touch screen with USB connection you will not need to install any drivers. There is no further
calibration needed, it is all factory set.
The surface of the touch screen is pure glass. Scratches will not effect proper operation. The touch screen can be used with bare
finger and even with gloves. Avoid heavy rain (flow of water) on the surface. This might result in false touches along the edges of
the touch screen.
10
Maintenance
There are no user serviceable parts inside the monitor. When the monitor is used in its intended environment there is not much
maintenance needed. Please follow these directions:
•
Turn off the product and disconnect from the power source before cleaning or maintenance.
•
To reduce the risk of electric shock, follow all safety notices and never open the touch monitor case
•
Avoid dust and water to enter the monitor and never open the monitor for cleaning. This might damage the
components inside.
•
Clean the chassis and glass with a soft, slightly moistened cloth. Do not use any abrasive or volatile cleaners.
•
Always thoroughly dry off any moisture on the monitor and glass before storing.
•
Check all mounting screws if these are still sufficient secured
•
Never use compressed air to clean the monitor.
