P
14
/
30
N-LINE OWNERS MANUAL
9.6
Engineering OSD
Optional N-Line monitors can be featured with engineering OSD function controlled by the dimming knob (encoder)
or 3 external buttons (+ - and power). The functionality is limited to one-way OSD control. Please refere to the flow
chart below for instructions:
(Note: if the monitor is switched off and on during this operation it could be that the knob is still in the OSD-modus.
In that case wait for 10 seconds before using the knop again.)
Symbol
Encoder
External Buttons
●
Switch function of encoder (press knob to activate)
Middle button
→
Increase, rotate CW
Right button
←
Decrease, rotate CCW
Left button
Press ● for ≥10
sec to enter OSD
Press → or ← to
scroll through
the menu items
Press → or ← to
adjust parameter
Desired
item?
No
Press ● to select
menu item
Yes
Repeat until desired
parameter is active
Wait for OSD
menu to disappear
Adjust
another
parameter?
Dimming function
is active again
Yes
No
