36
INA 15092:I 05/30/01
P
OINT
R
EAD
Selecting
2
from the Read Status Menu allows the operator to review annunciator point parameters entered into the INA.
The INA prompts the operator for the address of the point to be read.
READ
STATUS
M
ENU
O
PTION
2
NORMAL
ANNUNCIATOR ONE
NETWORK ANNUN POINT
N001 A1P1
Status: Disable, Alarm/On, Trouble, Alarm/
On/Trouble, Normal or Blank
Upon entering the address, the INA will display a distinct screen format as illustrated below:
Annunciator Points
20-Character Custom Label
Node Mapping
ENTER AXXPYY FOR PT. STATUS
(BCKSPC TO ABORT) :
Software Type ID
Point Address
N
ETWORK
P
OINT
R
EAD
Selecting
3
from the Read Status Menu allows the operator to view the status of any device, annunciator panel, annunciator
point, or zone on the network for all AM2020/AFP1010 nodes linked to the INA. The INA prompts the operator for the
address of the network point to be read:
Only nodes programmed into the INA can be accessed with this feature. If the operator attempts to use the Network Point
Read function on a node that is not present on the network system or not programmed into the INA, the following error
message will occur:
After the operator enters the desired point, the display will indicate that a Read Status is in progress until the point
information is received. If the INA does not receive a message from the network node within 20 seconds, the INA will
display the error message above followed by an "All Systems Normal" message or system event (if present). Once the
information is received, it will be displayed for one minute or until the operator presses ENTER, at which time the CBE
information for that point will be displayed for one minute. If the point is a reverse zone, the CCBE information will be
displayed for one minute.
READ
STATUS
M
ENU
O
PTION
3
NODE XXX IS OFF-LINE OR NOT PROGRAMMED
INTO THE SYSTEM
ENTER NXXXLYY(D/M)ZZ, NXXXZYYY, NXXXAYY,
NXXAYYPZZ (BCKSPC TO ABORT) :
www.PDF-Zoo.com
