08099A-1 16
FLASH FUNCTION
•
Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flash
can also be used to restore a dial tone to make a new call.
CHANNEL SELECTION (40 Channels)
A.
AUTO CHANNEL SCAN
•
When you place or receive a call and handset TALK button is pressed, the Excursion
®
39705 auto-scans for a clear channel.
•
Once it finds a clear channel, the handset LCD Display symbol will light steadily.
B.
MANUAL CHANNEL SCAN
•
If the existing channel becomes noisy or starts having interference, you can either move closer to the
base unit or press the SCAN / PRG button on the handset until better (Figure 17)
reception is found.
OUT OF RANGE WARNING
•
The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines,
or even other cordless telephones.
•
If you far away from the base unit, the handset beeps and "OUT OF RANGE" is
shown on the
LCD display to warn you that the background noise level is too high for proper
communication between the handset and the base unit.
•
When you hear this sound and see the "OUT OF RANGE" display, you should move
closer to the
base unit. Otherwise, the call will automatically cut off after 30 seconds.
LOW BATTERY WARNING
•
When the handset battery voltage level is low, the handset LOW symbol is shown on the LCD Display.
•
Return the handset on the base cradle to charge.
PAGING FUNCTION
•
If you have misplaced the handset or need to alert the person nearby the handset,
press the
PAGE button on the base unit. Each press of this button will activate the handset to
beep for 30
seconds and LCD Display shows "BASE CALL" while it is being paged by the base unit.
NOTE:
Even though the handset is in the RING OFF mode, the page function will still operate.
INTERCOM FUNCTION
A.
ACTIVATING THE INTERCOM USING THE BASE
1.
Press the INTCOM button on the base. The base unit will beep and the IN USE LED indicator will
flash. The handset will sound a repeating series of beeps for 30 seconds to
indicate that the Intercom function is activated.
2.
The handset user must press the INTCOM button to respond.
3.
The base user can now talk to the person at the handset. (Figure 18)
4.
The base unit user will hear the handset user through the base unit speaker.
B.
ACTIVATING THE INTERCOM USING THE HANDSET
1.
Press the INTCOM button on the handset. The IN USE LED indicator on the base unit will flash and the
base unit will beep continuously to indicate that the Intercom function is activated.
2.
The base user can respond by pressing the INTCOM button on the base unit and start conversation.
C.
TO END THE INTERCOM FUNCTIION USING THE HANDSET
•
Press the INTCOM button on the handset or return the handset to the cradle to end the conversation.
D.
TO END THE INTERCOM FUNCTIION USING THE HANDSET
•
Press the INTCOM button on the base to end the conversation during intercom mode.
E.
IF YOU RECEIVE A CALL WHILE USING THE INTERCOM FUNCTION
l
When a ringing sound is being heard from the handset, press the handset TALK button to disengage the Intercom function and
connect you with the incoming call.
F.
IF YOU WISH TO USE INTERCOM WHILE IN PHONE LINE
1. Press the handset INTCOM button. The line will hold automatically, the intercom function will turn on after a series of 3 beeps.
2. Press the handset INTCOM button again to disconnect the Intercom mode and resume your phone conversation.
ANSWERING MACHINE OPERATION
The Excursion
®
39765 features a sophisticated Digital Answering System. Incoming Messages (ICMs), Outgoing Messages (OGMs)
and Memo messages are stored electronically into digital memory. Messages are accessed instantly and arranged compactly in this
memory. The Excursion
®
39765 can store 10 minutes of messages (ICMs, OGMs and Memos combined).
VOICE MENU SYSTEM
A sophisticated Voice Menu System has been designed and pre-programmed into the Excursion
®
39765. This system will verbally
OUT OF RANGE
BASE CALL
PAGING
INTERCOM
