11 08099A-1
MOUNTING POSITION
DESKTOP USE:
1.
Install and attach the wall mount bracket onto the bottom of the base at the
position as shown in Figure 5.
2.
Connect the telephone line cord to the TEL LINE jack on the rear of the base
unit and connect the opposite end to the telephone modular jack.
(Figure 5)
WALL USE:
A. WITH A STANDARD AT&T OR GTE MODULAR WALL JACK
1.
Install the wall mount bracket at the position as shown in Figure 6.
2.
Connect the short telephone line cord to the TEL LINE jack of the base unit.
3.
Connect the opposite end of the telephone line cord to the modular wall jack.
4.
Align the wall mounting slots with the studs located on the modular wall plate and slide the base down to lock in place.
(Figure
6)
NOTE:
If you do not have a standard
modular wall jack, find a qualified technician
to mount one on the wall.
B. WALL MOUNTING (No Standard Wall
Jack)
1.
Drill two
holes with a
vertical
distance
between the
two marked
positions of 3
15/16
”
(100 mm) as shown in Figure 7.
2.
Drive a screw into each of the holes. Tighten them to the end of the screw line, only leaving the smooth part of the screw head
outside the wall.
3.
Hang the unit onto the screws, then slide it down firmly to
fasten the base securely.
(Figure 7)
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 8.
(
Figure 8)
