08099A-1 12
CONNECTING THE HEADSET
For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 9. The handset receiver and
microphone are disabled when the headset is connected.
(Figure 9)
Press the TALK button to answer or
place a call using the headset.
Refer to the manufacturer
’
s headset
manual for more details.
POWER
INSTALLATION
BASE UNIT POWER CONNECTION
CAUTION:
You must use a Class 2 Power
Source 9VDC 500mA. The plug
must correctly fit the base unit’s
adapter jack.
1.
Plug the adapter into a
standard AC outlet.
2.
Insert the small plug into the adapter jack on the rear of the base as shown in Figure 10. Upon power-up, the digital LED display
will show "- -". After 8 seconds, a long beep will be emitted and announce:
"Answering machine is on. Please change the time and
record your announcement."
(Figure 10)
HANDSET BATTERY
INSTALLATION
CAUTION:
Use only the Nickel
Cadmium (Ni-Cd)
battery type
included with this
unit. Use of other
battery type may
cause injuries or
damage.
1.
Remove the battery
compartment
cover of the handset.
2.
Connect the rechargeable Ni-Cd battery as shown on Figure 11.
(Figure 11)
3.
Insert the Ni-Cd battery into the battery compartment of the handset.
4.
Slide the battery compartment cover firmly in its closed position.
BASE UNIT BATTERY INSTALLATION
1.
Using a
screwdriver, remove the screw securing the battery cover.
2.
Remove the battery compartment cover of the base unit.
3.
Connect 4 AAA size 1.5V alkaline batteries (not included) into the battery compartment .
4.
Screw back the cover of the battery compartment.
NOTE:
The 4 AAA 1.5 alkaline batteries serve as the backup power for saving messages and system settings in the event of a power
failure.
