10
SmartCraft gateways
Installation and Operation Manual
NAVMAN
3-2 SmartCraft engine data displays
To display the SmartCraft data, press
and
select
SmartCraft
, then press
,
or
or to select one of the four SmartCraft displays,
shown below.
For the Small, Medium and Large gauges:
The factory default has gauges appropriate
to the type of engine. To change what gauges
are displayed, see section 3-7: Gauge setup.
If the boat has twin engines, the red needle
Small
: Six small ‘analogue’ gauges:
Medium
: Two medium & two small ‘analogue’
gauges
Tanks
: Tank levels (see next page)
or number shows port data, green shows
starboard data.
The gauges can be set up to be analogue
(dial) or digital (number) (see section 3-7:
Gauge type
and
Speed range
).
Each display has three items of header data. To
select what data is displayed, see section 3-7:
Header setup.
Large
: Two large ‘analogue’ gauges
Header
data
