23
SmartCraft gateways
Installation and Operation Manual
NAVMAN
To go to the SmartCraft setup data and calibrations,
press
until the Setup menu is displayed,
then select
SmartCraft
.
Note:
If there is more than one SmartCraft capable Nav-
man instrument in a system, some setup data may
be different in each instrument.
4-6-2 Engine fault history
To display a list of recent engine fault alarms, press
, select
SmartCraft
, then select
En-
gine fault history
.
When the Engine fault history is dis-
played
Press
or
to page up and down the
list.
To display more information about a particu-
lar fault:
i
Press or to select the fault.
ii Press
to display the information.
iii Press
or
to return to the
list.
To exit the list, press
.
To clear the engine fault history:
Go to the engine fault history display, press
and select
Reset fault his-
tory
.
4-7 SmartCraft setup data and calibrations
The setup and calibration options are:
Tanks
Set up and calibrate the tanks (see section 4-7-1).
Troll window
Select from a menu:
On idle
: Troll window is displayed when you
press
and the throttle is at idle and the
engine is in gear.
Always
: Troll window is displayed when you
press
.
Never
: Troll window never displayed, troll
control is not available.
Troll mode
Select what troll mode controls:
RPM
: Controls engine idle RPM.
Speed
: Controls engine idle RPM to try to
achieve the desired boat speed.
See section 4-3, notes 1 and 2
Trim
Set up and calibrate the trim display (see section 4-7-2).
