19
SmartCraft gateways
Installation and Operation Manual
NAVMAN
4-1 Setting up the TRACKFISH 6600 for Smartcraft
There are two SmartCraft items in the TRACKFISH
6600 System setup menu. To display the System
menu, press
until the Setup menu is dis-
played, then select
System
.
Sonar
Select
:
For normal sonar operation
De-select: To disable the sonar transducer
and sonar functions. For use
with the instrument’s SmartCraft
functions only,
SmartCraft
Select: Normal SmartCraft operation
De-select: SmartCraft functions. The instru-
ment will now use any Navman fuel
sen sors which are connected.
4-2 SmartCraft engine data displays
There are four SmartCraft engine displays, shown below.
Note: If the boat has twin engines, two needles will appear on most of the gauge displays. The red needle
or number shows port engine data, green shows starboard engine data.
Diagnostics
: Shows
eight small gauges.
Press
, select
SmartCraft
, then
select
Diagnostics
.
Engine data large
:
Shows two large
gauges. To display this,
press
, select
SmartCraft
, then
select
Engine data
large
.
Small:
Eight small gauges
Medium:
Two medium
,
four
small gauges
Large:
Two large gauges
Tanks:
Tank levels
Data header display area
Tank status
: Shows
the levels in the tanks.
To display this, press
, select
SmartCraft
, then
select
Tank status
.
Cruising
: Shows two
large and four small
gauges. Press
, select
SmartCraft
,
then select
Cruis-
ing
.
Engine data display area
Note:
SmartCraft utilises NavBus comms. NavBus will
turn on if SmartCraft is turned on.
