18
SmartCraft gateways
Installation and Operation Manual
NAVMAN
Before a SmartCraft gateway is connected, the TRACKFISH 6600 functions normally, with no SmartCraft
functions. When a SmartCraft gateway is connected and
SmartCraft
is turned
On
(see section 4-1),
SmartCraft functions become available and some standard functions change.
SmartCraft functions
Data displays
Engine performance and tank level displays .............................................................................................See section 4-2
Troll control
Automatically maintains a set engine idle RPM or idle boat speed ................................................See section 4-3
Trim indicator
Displays the trim angle when engine trim is adjusted ..........................................................................See section 4-4
Alarms
Engine fault alarms ...............................................................................................................................................See section 4-5
Engine fault list, a list of active SmartCraft engine fault alarms .........................................................See section 4-6
Engine fault history, a list of past SmartCraft engine fault alarms ....................................................See section 4-6
Tank low level alarms .......................................................................................................................................See section 4-2-1
Setup data and calibrations
SmartCraft setup data ......................................................................................................................See sections 4-1 and 4-2
SmartCraft calibrations, Tanks, Trim and Steering angle .......................................................................See section 4-7
SmartCraft setup data and calibrations .....................................................................................See sections 4-7 and 4-1
The SmartCraft data available depends on the engine type and the sensors fitted (see section 1-1).
4 Operation with a Navman TRACKFISH 6600
Changes to standard functions with SmartCraft enabled:
key
: When using troll control, pressing
can display the troll window. Press
a
second time to display the normal menu.
Fuel
: The fuel display functions normally but with fuel and speed data coming from the SmartCraft
system rather than from separate sensors connected to the TRACKFISH 6600.
If there are no optional level sensor(s) fitted to the fuel tanks (see section 1-1-1), then the Smartcraft
fuel flow is used to calculate fuel remaining. The fuel setup data is the same as the standard TRACK-
FISH 6600. You must tell the TRACKFISH 6600 when you add or remove fuel (see the
TRACKFISH 6600
Installation and Operation
manual).
If each fuel tank has an optional level sensor fitted (see section 1-1-1), then these tank levels are used
to calculate fuel remaining. In the Fuel display,
Used
changes to
Trip used
, and the only fuel
setup option is
Clear trip used
.
Trip used
measures the volume of fuel used until it is reset
to zero by selecting
Clear trip used
in the fuel setup menu. You do not tell the TRACKFISH
6600 when you add or remove fuel.
Engine hours
: Engine hours on the Log display come from the SmartCraft system.
It can not be reset.
Simulate mode
: Data from the SmartCraft engine(s) and sensors is simulated. The SmartCraft data
simulated will probably differ from the data available in your system.
For more information, see the
TRACKFISH 6600 Installation and Operation
manual.
