Northern N2NVR Series User Manual Download Page 76

Page: 76 / 167

Digital Video Recorder
User Manual

Issue: V4.3 (2020-05-09)

7.5.2

Motion Detection

The DVR will send motion detection alarm while something moving in the specific view of

camera.

Operation Description

Step 1

Click

Motion Detection

in the main menu or menu of the alarm management screen and

choose

Motion Detection

to access the Motion Detection screen, as shown in Figure 7-17.

Figure 7-17

Motion detection screen

Operation Steps

Step 2

Select a channel from the drop-down list of channel.

Step 3

Click

to enable motion detection.

Step 4

Enable the Event actions include: buzzer, alarm out, push message, pop up message, full

screen, send E-mail and alarm record.

Step 5

Click Area page to access the motion detection area setting, as shown in Figure 7-18.

Summary of Contents for N2NVR Series








































































































































































Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands

Northern N2NVR Series, User Manual

Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands