Digital Video Recorder
User Manual
10
Issue: V4.3 (2020-05-09)
and motherboard
If it is loose, please contact the company's after-sales
personnel.
3.3
Install Hard Disk
When installing for the first time, first check if the hard disk is installed. It is recommended to
use the Security/Surveillance rated Hard Disks.
It is not recommended to use a PC dedicated hard disk.
When replacing the hard disk, please turn off the power and then open the device to replace the
hard disk.
Please use the monitoring dedicated SATA hard disk recommended by the hard disk manufacturer.
Use a reasonable hard disk capacity according to the recording requirements.
3.3.1
Install One or Two Hard disks
Step 1
Remove the screws for fixing the upper cover and take down the cover.
Step 2
Take out the screws and install it to the screw holes, as show in Figure 3-1..
Figure 3-1
Installing the hard disk screws
Step 3
Route the screws through the hole on the base, push the hard disk to the appropriate
position on the left, as shown in Figure 3-2.