Northern N2NVR Series User Manual Download Page 108

Page: 108 / 167

Digital Video Recorder
User Manual

Issue: V4.3 (2020-05-09)

Step 2

Set mode of display. Select a display mode from the

SEQ

drop-down list.

Step 3

Select dwell time from the

SEQ

Dwell time drop-down list(the display screen will loop

play the real time video according to setting time).

Step 4

If user use CVBS monitor to view live video, adjust the offset position and color

Step 5

Click

to save dwell settings.

7.7.6

Logs

Search for logs information and export the information.

Operation Steps

Step 1

Click

Logs

in the main menu or menu of the system management screen and choose

Logs

to access the log screen, as shown in Figure 7-47.

Summary of Contents for N2NVR Series








































































































































































Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands

Northern N2NVR Series, User Manual

Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands