Northern N2NVR Series User Manual Download Page 126

Page: 126 / 167

Digital Video Recorder
User Manual

110

Issue: V4.3 (2020-05-09)

8.4

Playback

8.4.1

Video Playback

Video playback refers to playing of videos stored in local hard disks.

Procedure

Step 1

Click

in the function navigation bar, the video playback interface is displayed,

as shown in Figure 8-14.

Figure 8-14

Video playback

Step 2

Select a channel. Click a device in the device list. A selected device is marked with

An unselected device is marked with

Step 3

Select a date from calendar at left bottom, the date will be colored if it has record as

shown in upper figure.

Step 4

Tick the type of record, such as schedule record, manual record and alarm record.

Step 5

Display videos.

After a device and date are selected, video information is displayed below the video pane.

The time scale above the file axis shows the different time points of video recording. The

time in blue in the middle is the time of the video playing.

Summary of Contents for N2NVR Series








































































































































































Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands

Northern N2NVR Series, User Manual

Search results

Summary of Contents for N2NVR Series

Reviews:

Related manuals for N2NVR Series

Brands by name

Popular brands