North&Wing&S,LSA&Maintenance&Manual&
Model:&Sport&X2&582&
Issue 3.2
Printed: July 16 2017
Page 66
4.3.8A
REPLACING FRONT FORK TO 2016 TRIPLE TREE COMPLETE ASSEM.
Task Description:
1. On the old fork disconnecting the Steering stabilizer, brake line and throttle cable.
2. Remove the older front fork by removing the center pivot bolt (see picture about)
3. Simply put the new fork on and install the new pivot bolt. Nut -tighten to snug.
4. Hook up the Steering stabilizer, brake line and throttle cable.
5. Bleed the brake line per section 4.3.5
Check all fitting and connection
4.3.9
&
Repair/Replace Seat Frame and Front Seat Backrest
Skill Level:
LSR-M, A&P
Tools:
Two 7/16” wrenches, Philips head screw driver
Materials:
Replacement parts
Task Description:
The seat frame is a structural member when the wing is in place. Therefore, the wing must be
removed before the seat frame can be removed.
1.
!
Remove wing from trike.
2.
!
Tie main mast in upright position using a soft piece of rope tied from the mast to the
gear case.
3.
!
With mast in upright position, unclip and remove the attachment pin at lower end of
cylinder on both sides and tie pneumatic cylinders clear of seat frame.
4.
!
Pull seat belt straps out from seat cushions.
5.
!
Remove seat cushions by pulling them loose from their velcro attachments. There are
straps on the front corners on the underneath side of the seat cushions that slide over
the metal plate under the cushions. Be sure to slide the front edge of the cushion off
these metal plates.