North Wing S-LSA Maintenance Manual
Model: Scout 912
Version 3.2
Release date 04-16-2014
Page 62
Setting The “Full” Point
Put the probe into your tank. Turn the FULL screw CCW until the
needle indicates the liquid level in your tank. For best results, the
probe should be fully immersed in a full tank. If you accidentally
adjust below your tank level, turn the FULL screw full cw and repeat
this setting.
Remove the unit from the tank. Shake the unit a few times to
remove the residual liquid. The needle should now rest on or below
the empty mark. This completes the calibration.