Page 48 of 64
Implementation and operation
553-2681-100 Standard 5.00 August 1996
Note 1:
When the CAS feature is defined, a signal Remote key is
assigned automatically to the key above LPK5 on all CAS Main
Attendant Consoles.
Note 2:
For the M1250 and M2250 Attendant Consoles, the C/H key
acts as the CAS key.
LD 16 –
Add or change a trunk route at a CAS Main location.
Prompt
Response
Description
REQ
NEW, CHG
Add, or change the CAS Main.
TYPE
RDB
Route Data Block.
CUST
xx
Customer Number.
ROUT
0-511
Route Number.
TKTP
RLM
Release Link Main trunk type.
...
ICOG
ICT
Incoming trunk route.
ACOD
nnnn
Trunk access DN. This DN and the Route Member Number
display at the CAS Attendant Console. This DN cannot be
dial-accessed.
...
CNTL
(NO) YES
Changes to controls or timers.
- TIMR
FLH
0-(512)-32000
CAS flash timer in ms. Recommended setting is 768 ms or
greater. The flash timer must be at least 256 ms shorter than
the outgoing flash timer (OGF) at the Remote end.
ICF 0-(512)-32640
Incoming flash timer.
OGF
0-(512)-32640
Outgoing flash timer.
ODT
256-(4096)-16128
Outgoing end-of-dialing timer for Digitone trunks.
