Page 22 of 64
Equipment specification and operation
553-2681-100 Standard 5.00 August 1996
Installation and connections
The QPC250 RLT circuit pack can be inserted into any trunk-pack position
on a peripheral equipment (PE) shelf. The circuit-pack handling precautions
must be observed when installing trunk packs in PE shelves. Installation
procedures for trunk-circuit packs are provided in
Meridian 1 system
installation procedures
.
When telephone lines connected to the trunk circuit are exposed to foreign
voltages by direct contact or induction—for example, by power-line crosses
or by lightning—protection devices must be installed at the customer’s
premises. These devices must be capable of providing a path to ground from
the tip and ring leads for foreign voltages that exceed a 600-V peak.
Typical cross-connections between a QPC250 RLT trunk at a Remote site
and a QPC70 CO trunk at the Main site are shown in
Figure 2
.
EquipSp.BDY Page 22 Tuesday, January 14, 1997 9:16 AM
