Picocell 1900 Radio Unit Installation / 21
September 3, 1998
Method 02-0245
Draft
Figure 10 – Remote Power Supply Mounting (Typical)
Procedure 6 – Remote AC power supply Installation
Step
Action
Observation
Note that AC outlets must be provided by a
qualified electrician.
AC outlet placement per IM 04-0241 and Fig-
ure 10.
1
Locate the AC-DC power supplies and mount as
shown in Figure 10. Coil excess cord and tie
back excess cable with tie wraps.
2
Connect the power supply jumpers to the MDF
blocks see IM-04-0244 for jumpers and cabling.
transciever and terminate power wires as shown
on Figure 10
3
Plug the power supply into the AC outlet and
verify the supply output power.
Verify the transciever operation in IM 04-0246
- 48VDC
4
See IM 18-0244 fro cabling and jumpering of DC
power.
AC Power Bars
Jumper Rings
Jumper Routing
45"
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
37.
0"
9.
2
"
1.
0
"
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
3.0"
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
A C - D C
-48VDC
CSI
1 1 0 V A C
-48V
