20 / Picocell 1900 Radio Unit Installation
Method 02-0245
September 3, 1998
Draft
Figure 9 – PICOCELL Co-located power supply
Procedure 5 – Co-located AC power supply Installation
Step
Action
Observation
Note that an AC outlet must be provided by a
qualified electrician.
1
Locate the AC-DC power supplies and mount as
shown in Figure 9. Coil excess cord and tie back
excess cable with tie wraps.
2
Connect the power supply to the transciever and
terminate power wires as shown on Figure 12
3
Plug the power supply into the AC outlet and
verify the supply output power.
Verify the transciever operation in IM 04-0246
- 48VDC
transciever powers up with activity on LEDs
