14 / Picocell 1900 Radio Unit Installation
Method 02-0245
September 3, 1998
Draft
.
Procedure 1 – Unpacking and Inventory transciever Material
Step
Action
Observation
1
Inspect the cartons for any damage.
2
Refer to Section 2.3 Product Stock List
and Mounting Kits, for a list of parts to
be included in the cartons
Table 2, “Stock List and Mounting Kits,” on
page 9
3
Remove all equipment from their cartons
and verify the equipment received is not
damaged. After all of the parts are
removed from the cartons and inspected,
inventory them making sure that all the
parts listed in Section 2.3 are on site.
4
Refer to the PICOCELL 1900 Installa-
tion Planning Method 02-0242 and the
System Design Specification to deter-
mine how many CSI and PICOCELL
1900 (PICOCELL 1900 Base Station)
transcievertranscievers are required and
to determine where and how to position
the units.
5
Also take into consideration the desired
location of the Hybrid. Due to the length
of the antenna cables, the transceiver(s)
and Hybrid(s) will have to reside close
together. Refer to the PICOCELL 1900
Installation Planning Method 04-0242
and Antenna installation 12-0152 for
spacing requirements and cable length
considerations.
