Picocell 1900 Radio Unit Installation / 15
September 3, 1998
Method 02-0245
Draft
..
Procedure 2 – Wall Mounting and securing the Radio Mounting Bracket
Step
Action
Observation
1
Locate the wall mounting bracket and
the screws provided. Determine the
required direction transcieverf the wall
mount bracket orientation from the Sys-
tem Design floor plan. Refer also to
Appendix B - Orientation
2
Locate the 4 mounting screws with the
mounting bracket . If external antennas
are used, the transcievers and Hybrid(s)
will have to reside close together. Ref-
erence Method 04-0152 for antenna sys-
tem installation.
Figure 4
3
Square the bracket with the wall and/or
ceiling and fasten the bracket with the
first screw.
Appendix B
4
After one top corner has been fastened
to the wall, check to make sure the wall
mounting bracket is still level before
installing the additional wood screws
5
Install the remaining wood screws into
the wall mounting bracket.
Figure 4
6
Position the transciever into the bracket
and ensure that the locking retainer is
locked and correctly positioned .
