22 / Picocell 1900 Radio Unit Installation
Method 02-0245
September 3, 1998
Draft
4.2 Power Supply connections
The PICOCELL 1900 transciever is powered by an AC to -48VDC
supply which is mounted either at the CSI location or near the
PICOCELL transceiver mounting position. If it is mounted near the
transciever (co-located), an AC outlet must also be within close
proximity. When the supply is co-located near the transceiver, the
power wiring may or may not be accommodated in the station wiring
conduit and may need to be dressed neatly on the wall or ceiling surface.
See Figure 9.
See IM 02-0241 for placement, mounting and connection of the power
supply at the remote CSI location.
Figure 11 – Power supply and connections
4.0"
1.
0"
3 terminal IEC 320 Jack
1 2 0 V A C
G r d
4 8 V
6.
5
"
0.
7"
