Installing a VCE
2-11
Installation Manual 323-3221-291 Rel 1.0 Standard
Procedure 2-3 (continued)
Cabinet installation (wall mount)
Figure 2-6
Wall mounting anchor holes and mounting points
Step
Action
3
Drill the wall anchor holes in accordance with one of the following:
•
Cement/masonry wall
Use an electric drill with a masonry drill bit. The
size of the hole depends on the fastener that you are using. The screws
must be at least 1/4 in. (6.4 mm) diameter. Drill the holes at least 3.00 in.
(76 mm) deep. Use a vacuum cleaner to remove cement particles from
the holes.
•
Wood-stud wall
Drill appropriate pilot holes for 1/4 in. (6.4 mm)
hex-head lag screws into a wood stud. Drill the holes at least 3.00 in.
(76 mm) deep.
—continued—
23.00
20.50
9.00
0.875
9.75
3.00
16.00
3.375
4.00
4.00
4.00
4.00
4.00
1.875
Legend
&
Mounting points (9)
Anchor holes (16)
All dimensions are in inches