2-2
Installing a VCE
Video Codec Enclosure (VCE) 323-3221-291 Rel 1.0 Standard
Mounting a VCE
A VCE must only be installed by trained service personnel and all electrical
connections to the main ac-supply must be made by a licensed electrician
following all the relevant local electrical codes. Where a direct connection is
made to the main ac-power supply, a double-pole manual disconnect device
must be used. Read through the appropriate procedure before proceeding with
the installation.
A VCE may be installed:
•
free-standing on the floor (see Procedure 2-1 on page 2-3)
•
floor mounted in a zone 2-4 earthquake area (see Procedure 2-2 on page
2-5)
•
wall mounted (see Procedure 2-3 on page 2-10)
Note:
Connecting the DV-45 equipment and setting DV-45 card options is
application specific and is not detailed in this document. Refer to the
application documentation for specific information (for example, for the
DVLN Rel 3.1 application, refer to the
DVLN System Documentation
,
PEC NT2H65AC).
