Nortel Modular ICS 7.1, Install Manual

Page: 447 / 700

System prgrming /
447
N0130943 02 Modular ICS 7.1 Installer Guide
CLID match
This setting determines the minimum number of digits that an
external call must match to an existing system speed dial
number in order for the system to offer a name display for the
CLID prompt, if the system speed dial number is set up to
display the caller name.
1. Under
Featr settings
, press
≠
.
The display shows
Backgrnd music:
.
2. Press
‘
until the display shows
CLID match: 8
.
3. Press
CHANGE
to select the a number from
3
to
8
, or select
None
, if you do not require any number matching.
4. Press
®
to exit or
‘
to continue programming.
Silent Monitor
You can monitor Hunt group members using a two-line
display telephone that has been designated as a supervisor
telephone.
You create the Silent Monitor feature capability by:
• determining how many system telephones will be allowed
to be supervisors. (Refer to
SM sets on page 481.)
• determining which telephones will be allowed to be
supervisors. (Refer to the SM Supervisor field under
Capabilities on page 345).
• determining the password that the supervisor enters after
the feature code
≤•fifi‚
is entered to start
monitoring Hunt group telephones. (Refer to Silent
Monitor password on page 418.)