Nortel Modular ICS 7.1, Install Manual

Page: 450 / 700

450
/ System prgrming
Modular ICS 7.1 Installer Guide N0130943 02
CAP/KIM assign
Installer password required
This setting designates a telephone as an enhanced central
answering position (eCAP). A maximum of five designated
eCAPs can be installed in a Modular ICS system. The system
can support more CAP configurations that are not designated
in programming as eCAPs. Refer to the Tips below for
information about the difference between OKIMs and eKIMs.
• Key indicator modules (KIMs). KIMs that are attached to
7316E digital phones that have been designated as eCAPs
are called eKIMs.
A 7316E+KIM which is not assigned with the DN of the
telephone under
CAP/KIM assgn
, is called an ordinary
KIM (OKIM). OKims support memory button
programming, only.
• Legacy hardware: Existing systems may have 7324 digital
phones attached to CAP modules.
The eCAP can be used to:
• monitor the busy/not busy and Do Not Disturb status of
system telephones
• answer external calls on up to112 lines on a 7316E+eKIM
and extend calls to other system telephones
• send up to 30 messages to other system telephones
• provide extra memory buttons for the telephones
• eKIMs can also support multiple appearances of a target
lines and Hunt group designators.
Use
≠
,
CHANGE
and the dialpad to enter the internal
number of the telephone.