Browser User Interface
31
3. Configure the standard conference parameters as appropriate for the
new conference. See steps 3 to 6 of “Scheduling a new one-time
conference” on page 17 for instructions on configuring the
parameters.
Note:
In the
Access Numbers
section, select
Choose a
Number
and select a DN pair, if not already selected
4. Configure the recurrence parameters as appropriate for the new
conference. Refer to step 4 in “Scheduling a new recurring
conference” on page 28.
5. Click
Set Conference
.
After the conference details are saved, the
Conference Details
window opens (see Figure 13 on
page 30
). This window displays
conference details and options in the same layout as the
Schedule a
New Conference
window. Use the Conference reference number,
shown in the
General Options
section, when recording a
conference-specific greeting. See “Recording a conference-specific
greeting” on page 77.
The
Conference Dates
section lists the scheduled dates for the
conference, including the first date specified in conference details.
The window also displays the success result for each date specified
in the recurrence criteria. In the case of a failure, the system indicates
the reason. For example, a failure can result because the DN is in use
or the number of available ports may be insufficient.
6. Click
OK
.
Editing a conference (one-time or recurring)
The following fields cannot be modified when editing a conference:
•
date
•
dual-card meeting option (a single-card conference cannot be made
dual)
•
recurrent option
