Nortel Communication Server 1000M, Installation And Configuration Manual

Page: 57 / 122

Configuring ISDN BRI hardware Page 57 of 120
ISDN Basic Rate Interface Installation and Configuration
Configuring ISDN BRI trunking with IP expansion
cabinets or MG 1000S systems
Configure the MISP card slot number for ISDN BRI trunking in LD 27. Refer
to Table 14 for the correct response to the LOOP prompt.
Configure DSL for ISDN BRI trunking in LD 27. Refer to Table 14 for the
correct response to the MISP prompt.
Installation procedures
Summary
The following is a summary of the procedures to install and configure ISDN
BRI hardware. Collectively, the procedures apply to line, packet data, and
trunking applications. Individually, some procedures apply
only to line,
packet data, or trunking.
Table 14
Correct responses to LOOP and MISP prompts in LD 27
LOOP MISP
Cabinet Systems
Main 1 – 9 1 – 9
Expansion 1 11 – 19 11 – 19
Expansion 2 21 – 29 21 – 29
Expansion 3 31 – 39 31 – 39
Expansion 4 41 – 49 41 – 49
CS 1000S and
Chassis Systems
MG 1000S 1 11 – 14 11 – 14
MG 1000S 2 21 – 24 21 – 24
MG 1000S 3 31 – 34 31 – 34
MG 1000S 4 41 – 44 41 – 44