Nortel Communication Server 1000M, Installation And Configuration Manual

Page: 118 / 122

Page 118 of 120 Generating traffic reports
553-3001-218 Standard 2.00 September 2004
For example, to verify ISDN BRI traffic generated during acceptance testing,
select the network traffic report and the MISP traffic report as follows:
INVS 1 11
The system printer should print these two reports. Check the reports to make
sure the traffic generated during the test is reflected in the reports.
The network traffic report shows the traffic activities for lines and trunks,
including ISDN BRI DSLs. Figure 33 is an example of the Network traffic
report.
13 ISDN BRI MISP and/or BRSC
messages report
14 Trunk DSL system traffic report
15 MPH traffic report
Figure 33
Network traffic report
0111 TFS000
004 TERM 00000 0000120 00090 00000 0000535 00300
008 TDS 00000 0000050 00060 00000 0000200 00100
012 CONF 00001 0000010 00020 00003 0000090 00080
016 TERM 00000 0000000 00000 00000 0000000 00000
Note: DSLs are included in TERM type.