Nortel 2750, Installation Manual

Page: 51 / 108

Chapter 2 Cabling the VPN Router and turning the power on
51
Nortel VPN Router Installation — VPN Router 2750
SSL VPN Module 1000 LEDs
Figure 19 shows the LEDs on the Secure Sockets Layer (SSL) VPN Module 1000.
Figure 19
LEDs on the SSL VPN Module 1000
Table 15 describes the LEDs on the SSL VPN Module 1000.
Table 15
LED indicators on the SSL VPN Module 1000
LEDs Indicator Description
Online Steady green The SSL VPN Module 1000 is operating normally.
Yellow A reset occurred on the SSL VPN Module 1000.
Off The SSL VPN Module 1000 is not receiving power.
Activity LED 1 Steady green The SSL VPN Module 1000 is operating normally.
Flashing green Activity is occurring on the SSL VPN Module 1000.
Yellow A reset occurred on the SSL VPN Module 1000.
Activity LED 2 — Not used. (This LED is often lit, but it has no
meaning.)
Utilization
(4 LEDs)
Steady green Together, these four LEDs indicate an approximate
average level of CPU utilization. When one LED is
lit, CPU utilization is approximately 25%; when two
LEDs are lit, CPU utilization is approximately 50%.
Blinking in unison The SSL VPN Module 1000 is idle.
11356EA
Online
Utilization
1
Activity 2 -