manualshive.com logo in svg

Nortel 2340, Installation Manual

Share
Download
Nortel 2340 Installation Manual Download Page 38

38

Software Installation of WLAN Location Engine 2340

NN47250-306 (324121-A Version 01.01)

Configuring the Time

To configure the time, do the following:

1

Select the 

Configuration menu>Configuration TIme. 

The Configuration Time window appears.

2

Enter the following information:

•

Time zone - Select the time zone from the drop-down list. Set the time manually, or configure a 
Network Time Protocol (NTP) server to synchronize the current time. 

•

Set Date & Time Manually - Select this to manually set the date and time.

•

Month, Day, and Hour - Select Month, Day, and Hour values from the dropdown list.  

•

Second, Minute, and Year - Enter the values in the text boxes.

•

Synchronize to NTP Server - select this option to configure an NTP server for time synchronization. 
Enter the NTP server information in the text box.

•

To submit all the time settings information, click 

Save

. It will prompt for a required reboot of the 

appliance.

Summary of Contents for 2340

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands