Nortel 1750, Install Manual

Page: 61 / 108

Chapter 3 Installing option cards and DIMMs
61
Nortel VPN Router Installation — VPN Router 1750
Figure 24
Installing and removing an option card
7
Lower the new option card into the slot, and gently press the connector into
the slot.
Seat the card in the slot. If you do not properly seat the card, it does not work.
8 Replace the screw that secures the card to the slot ( Figure 24 on page 61 ).
9 Replace the top cover on the chassis ( Figure 21 on page 55 ).
a Hold the cover at an angle, and slide it onto the chassis.
b
Use a screwdriver to insert and tighten the four screws that secure the
cover to the chassis.
10
If the VPN Router 1750 is installed in an equipment rack, mount it in the rack.
a Set the VPN Router 1750 on the rack-mount shelf in the rack.
Motherboard
Option card
Filler panel scre w
Rear of u nit
Option card slots
CS2600017A