53
.
Install a Media Gateway Controller and
DSP daughterboard
This chapter contains information about the following topics:
•
“Install a Media Gateway Controller” (page 53)
•
“Install a DSP daughterboard” (page 53)
Install a Media Gateway Controller
Install the MGC in slot 0 of a Media Gateway cabinet or chassis.
Install a DSP daughterboard
Procedure 3 “Installing a DSP daughterboard” (page 53)
describes how to
install a DSP daughterboard on an MGC.
Procedure 3
Installing a DSP daughterboard
Step
Action
1
Follow electrostatic safety procedures and place the MGC on a
safe Electrostatic Discharge (ESD) surface.
2
Place the DSP daughterboard in either daughterboard position
1, or daughterboard position 2, or both, depending on how the
daughterboards are configured from a TN perspective.
ATTENTION
For the PRI Gateway, the DB-96 and DB-128 daughterboards can
be used in both positions. A software package for this functionality is
required- Extended Media Gateway PRI (MGP) package 418
3
Ensure the DSP daughterboard is securely attached to the MGC
(using the four supplied screws and standoffs).
--End--
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01
4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.
Summary of Contents for 1000E PRI
Page 161: ......
