Nortel 1000E PRI, Installation And Commissioning Manual

Page: 98 / 162

98 Configure an E1/T1 card
Prompt Response Description
DGTP PRI Select a digital trunk type of 2.0 Mb/s PRI.
ISDN YES Integrated Services Digital Network.
MODE PRA ISDN PRI route.
IFC NI2 NI-2 TR-1268 interface type.
... ...
ICOG
xx
Either incoming, outgoing, or both way trunks.
SRCH (LIN) RRB Search method for outgoing trunk member.
ACOD
xxx..x
One seven-digit access code for the trunk route.
TARG 0-(1)-31 Trunk Access Restriction Group Number.
... ...
--End--
Procedure 27 “Configuring PRI2 trunk routes using LD 16” (page
98)
describes how to configure Route Data Block data required for
PRI2/E1 trunks. The example given in Table 28 "PRI2 route (LD 16)"
(page 98) is specific to the EURO interface, however, the PRI trunk route
is also supported on other PRI2 interface types.
Procedure 27
Configuring PRI2 trunk routes using LD 16
Step Action
1 Log on to the CS 1000E.
2 To access LD 16, enter:
LD 16
3 Enter the responses shown in Table 28 "PRI2 route (LD 16)"
(page 98) .
Table 28
PRI2 route (LD 16)
Prompt Response Description
REQ
aaa
Request (aaa = CHG, NEW)
TYPE RDB Route Data Block.
CUST
xx
Customer number, as defined in LD 15.
ROUT
0 - 511
Route number. Range the same as for Large System and
CS 1000E system.
... ...
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.