Enable PRI spans
105
Step
Action
1
In LD 60, enter the command to enable all 1.5/2.0 Mb PRI loops
through the software:
ENLL L
2
If the DDCH is disabled, enter the command in LD 96 to enable
the DDCH:
ENL MSDL sl s c
3
To enable the D-channels, enter the command in LD 96:
ENL DCH X
4
To request the current status of the D-channel, enter the
command:
STAT DCH
If the D-channel is established and operational, the system
responds with
DCH x EST
in LD 96.
--End--
Procedure 34
Enabling the NTAK93AB daughterboard
Step
Action
1
In LD 75, enter the command to enable all PRI loops:
ENL DDCS 1
2
Enter the command to enable the DCHI where the DCHI is
enabled, but all channels are disabled:
ENL DDSL n
3
To enable the D-Channels, enter this command:
STRT n
4
To request the current status of the D-channel, enter the
command:
STAT DDSL
If the D-channel is operational and enabled, the response is
ENBL ACTIVE
. All configured channels are normally enabled.
--End--
Procedure 35
Enabling the clock controller
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01
4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.
Summary of Contents for 1000E PRI
Page 161: ......
