Nortel 1000E PRI, Installation And Commissioning Manual

Page: 96 / 162

96 Configure an E1/T1 card
Prompt Response Description
- SREF Card Card number of PRI2 containing the Secondary Clock
Reference for the first IPMG.
To modify, use the CHG command (you can change the
PREF only if you change the MGCLK).
MGCLK sl s c Superloop, shelf, card number of PRI2 containing the
Primary Clock Reference for the second IPMG.
The card number (1 - 8) should match the span number
configured through the Web interface.
- PREF Card Clock Reference for the second IPMG.
- SREF Card Card number of PRI2 containing the Secondary Clock
Reference for the second IPMG.
To modify, use the CHG command (the PREF cannot be
changed unless the MGCLK is changed).
... ...
--End--
Use Procedure 25 “Configuring the PRI2 loop timers using LD 73” (page
96) to configure the PRI2 loop timers and thresholds.
Procedure 25
Configuring the PRI2 loop timers using LD 73
Step Action
1 Log on to the CS 1000E.
2 To access LD 73, enter:
LD 73
3 Enter the responses shown in Table 26 "PRI2 loop timers and
thresholds (LD 73)" (page 96) .
Table 26
PRI2 loop timers and thresholds (LD 73)
Prompt Response Description
REQ
aaa
Request (aaa = CHG, END, NEW, OUT, or PRT).
TYPE PRI2 DTI2 and JDMI are not supported for the PRI Gateway.
FEAT LPTI Feature = SYTI (System Timers).
LOOP loop Loop number for PRI2.
MFF
aaa
Multiframe format (aaa = AFF or CRC).
ACRC (NO) YES Automatic reporting of CRC-4 error.
ALRM
aaa
Default alarm handler selected (aaa = REG or ALT).
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.