Nortel 1000E PRI, Installation And Commissioning Manual

Page: 86 / 162

86 Configure an E1/T1 card
Prompt Response Description
YALM FDL, DG2 Yellow alarm method.
TRSH 0 - 15 Threshold.
... ...
--End--
Procedure 17 “Configuring PRI2 loops using LD 17” (page 86) describes
the configuration in LD 17 to support PRI2/E1 loops (common equipment
parameters) on the PRI Gateway.
Procedure 17
Configuring PRI2 loops using LD 17
Step Action
1 Log on to the CS 1000E.
2 To access LD 17, enter:
LD 17
3 Enter the responses shown in Table 17 "PRI2 loop configuration
(LD 17)" (page 86) .
Table 17
PRI2 loop configuration (LD 17)
Prompt Response Description
REQ CHG Change existing data.
TYPE CEQU Make changes to common equipment parameters.
CFN YES Common equipment.
...
PRI2 loop Digital loop (2.0 Mb) (0 - 254)
MG_CARD supl sh card The physical card for the PRI2 loop association to the
PRI Gateway.
The format is superloop, shelf, card.
For the PRI Gateway, card 1 to 8 is applicable.
--End--
Procedure 18 “Configuring DPNSS/DASS loops using LD 17” (page
87)
shows the configuration in LD 17 needed to support DPNSS loops
(common equipment parameters) on the PRI Gateway.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.