© Norsat International Inc.
(“Norsat”) All Rights Reserved
2021-12-20 DOC-001527 Rev A
36
4.1.3 Manual Override
The manual override switch on the IDU front panel allows the user to toggle the manual override
status on the ODU (See Section 3.2 for details on operating mode). The LED ring on the manual
override switch will be illuminated while the Manual Override is enabled.
MANUAL OVERRIDE
DISABLED
MANUAL OVERRIDE
ENABLED
When manual override is pressed, the user is taken to the Device Selection page (See section
4.2.6.1.1). The Manual Override button will only have an effect if the IDU and ODU are connected.
If there is a connection error, pressing the Manual Override button has no effect.
Note: It may take a few moments for the LED to illuminate after the button is pressed as
the command is sent to the ODU.
4.2 LCD Screen
4.2.1 Menu Navigation
There are two main menus that are accessible through the IDU LCD display: the
Status Page
,
and the
Settings Page
. The status page allows for monitoring of the RSW and device statuses.
The Settings Page allows for the configuration of ODU and IDU settings. Pressing
Up
and
Down
moves the indicator, allowing the user to select the desired setting. Pressing
Enter
takes the user
to that specific settings page. Pressing
Back
takes the user to the previous page. Menu flow
charts are shown below:
