Norland Connect-Chek CC6000, Manual

Page: 70 / 109

70
7.2 SCAN OPTIONS TAB
• Pass/Fail Criteria : This section contains the current list of scan Criteria for selection
along with a display of the settings in the chosen criteria. At the completion of a
successful scan, the quantitative results are compared against the Pass/Fail Criteria
selected. The list of criteria available are either factory-supplied (industry-standard)
choices or else User-created criteria sets. Both types can be viewed using the
Criteria Add/Edit dialog option of the Tools menu, but only the User-created sets can
be changed or deleted in that dialog.
•
The Pass/Fail criteria for Fiber Undercut can be a fixed number or alternatively a
calculated limit based on measurement results for other geometry parameters
such as Radius of Curvature and Offset, using a predefined equation. If, for a
chosen Criteria, it is determined by equation, there will be a name for that
displayed in this section rather than a number. Clicking on that name will display
the Pass/Fail values in table and graphical form (see images below). For more
information and explanation of equations
(See page 95.)
TELCORDIA
IEC-2.50
IEC-1.25