Norland Connect-Chek CC6000, Manual

Page: 11 / 109

11
• The Report Generate dialog now shows the correct dates when activated, even if
NCC has remained running more than 24 hours.
• NCC no longer crashes if attempt made to delete first entry in “Add New
Reference” dialog when there are more than one entry in list.
• In “Add new reference” dialog (under Calibration tab), the CHANGE function now
works as intended.
• Live image now operates correctly for all types of Windows user accounts.
Previously, the Live image appeared black for users running NCC in a non-
Windows user account lacking Administrator-level rights, only corrected by
launching the Video Control dialog.
• Date controls in the Report Generation dialog now work correctly for any
operating system Regional Settings language/locality choice.
Changes for NCC v2.51:
• Redesigned data storage user interface and operation. Includes the following
changes:
a Addition of a checkbox allowing Operator to activate a data-save
prompt at scan completion.
b Moved “AutoSave” On/Off controls from Measure tab to Setup tab on
the user interface and renamed it as “Export to Text file”.
c User can now define location and name of program database file (used
as data source for Scan Reports).
• Feature added allowing Operator to delete all data records in the program
database (“Clear Data” option in Report menu list).
• Significantly reduced volatile (System RAM) memory use by program as well as
the amount of hard disk memory required to store each scan’s data into the
program database.
• Fiber Diameter entry (by Operator) now limited by program to 180 microns
maximum.
• Changes made to Scan Report format to insure result values and their
corresponding Pass-Fail limits are always shown with a proper number of decimal
digits.
Changes for NCC v2.50:
• Added Report Configuration and Generation capability and added option for
selecting automatic report generation at scan completion.
• Company Logos imported into the Report configuration now retain their aspect
ratio (i.e.; are not distorted from original shape) when a report is generated.
• Incorporated data storage into Microsoft Access database (used as data source
for generated Reports).
• Entering a Connector ID having both text and numeric content is now allowed.
• Any Reference Tools issued before version 2.00 release that does not
have the temporary label affixed, must be remarked by reversing the
sign of both X and Y markings in order for it to be used with this
version. For example, if original marking was “X = -0.004, Y =
+0.026”, the marking should be changed to read “X = +0.004, Y =