Norland Connect-Chek CC6000, Manual

Page: 48 / 109

48
4.2 TOOLS MENU
Reference Tools Add & Edit (Tools\Reference Tools Add_Edit):
When selected, the following configuration dialog will open. This dialog allows the
User to view, add new, or change existing Reference Tool definitions. These
definitions can be chosen later for use in a Reference Tool calibration (via the
Calibration/Reference Tool tab). The Offset X and Offset Y values in the dialog are
taken from those marked on each Reference Tool associated with a CC6000 system
HOW TO CHANGE AN EXISTING REFERENCE TOOL DEFINITION
• In the upper portion of the dialog, click on the name of the reference tool needing
change.
• In the lower portion of the dialog, change the values for that reference tool as
needed.
• Click the Change button and then click the Close button.
HOW TO ADD A REFERENCE TOOL DEFINITION
• Click the Add New button.
• In the upper portion of the dialog, find and click on the name of the new reference
tool.
• In the lower portion of the dialog, enter values for this new reference tool as
needed.
• Click the Change button and then click the Close button.
HOW TO DELETE A REFERENCE TOOL DEFINITION
• In the upper portion of the dialog, click on the name of the reference tool to delete.